Difference: VantageCalibration (1 vs. 2)

Autohome XYZ calibration

When to do

• Whenever the Vantage is started

What to do

Auto Z stage zero calibration

When to do

• Before auto tip-to-tip calibration
• Automatically performed when manually placing parts
• If you replace a material tip

What to do

1. Place a plastic sheet into the printer
2. Main Menu > Operator Control > Calibrate > Set Z Stage Zero > Auto Z Zero Calibrate
3. Head will move around and eventually will say it completed

Auto tip-to-tip calibration

When to do

• If you mechanically change anything in the print head
• ie. change a tip
• Or unscrew the head for service

What to do

1. Place a plastic sheet into the printer
2. Main Menu > Operator Control > Calibrate > AutoCal Tips
3. Head will move around and eventually will say it completed

Printing calibration job

When to do

What to do

Autohome XYZ procedure

1. Place a plastic sheet into the printer
2. Main Menu > Operator Control > Calibrate > Auto Home XYZ
3. Head will move around and eventually will say it completed