VantageCalibration < Imager

Tags: view all tags
---++ Autohome XYZ calibration

When to do

   * Whenever the Vantage is started

What to do

   1. Place a plastic sheet into the printer
   1. ==Main Menu > Operator Control > Calibrate > Auto Home XYZ==
   1. Head will move around and eventually will say it completed

---++ Auto Z stage zero calibration

When to do

   * Before auto tip-to-tip calibration
   * Automatically performed when manually placing parts
   * If you replace a material tip

What to do

   1. Place a plastic sheet into the printer
   1. ==Main Menu > Operator Control > Calibrate > Set Z Stage Zero > Auto Z Zero Calibrate==
   1. Head will move around and eventually will say it completed

---++ Auto tip-to-tip calibration

When to do

   * If you mechanically change anything in the print head
   * ie. change a tip
   * Or unscrew the head for service

What to do

   1. Place a plastic sheet into the printer
   1. ==Main Menu > Operator Control > Calibrate > AutoCal Tips==
   1. Head will move around and eventually will say it completed

---++ Printing calibration job

When to do

   * 

What to do

   1.
Raw edit | More topic actions
Topic revision: r2 - 2007-06-08 - mmt