Difference: StratasysVantage (1 vs. 6)

Revision 62007-11-15 - GordonWetzstein

Line: 1 to 1

META TOPICPARENT	name="PsmSpace"

Machine information

Line: 40 to 40


21 Sept, MMT	21 Sept, MMT	21 Sept, MMT	21 Sept, MMT	25 Sept, MMT		21 Sept, MMT	25 Sept, MMT	21 Sept, MMT	21 Sept, MMT

Added:

>
>

Tips for Modeling

if you make parts that slide into each other leave 1.5mm space between each side!

-- WolfgangHeidrich - 15 Mar 2006

VantageCharges.xls: Spreadsheet for computing charges

Revision 52007-06-27 - mmt

Line: 1 to 1

META TOPICPARENT	name="PsmSpace"

Machine information

Line: 31 to 31

Calibration - homing the printer before performing any head operation
Changing materials - changing materials canisters
Replacing drive block - replacing the material drive block

Added:

>
>

Replacing head assembly - replacing the print head assembly

Maintenance schedule

Revision 42007-06-08 - mmt

Line: 1 to 1

META TOPICPARENT	name="PsmSpace"

Machine information

Line: 28 to 28

Procedures

Changed:

<
<

Autohome XYZ - homing the printer before performing any head operation
Loading unloading materials - changing materials canisters
Replacing drive block - replacing the material drive block

>
>

Calibration - homing the printer before performing any head operation
Changing materials - changing materials canisters
Replacing drive block - replacing the material drive block

Maintenance schedule

Revision 32007-06-07 - mmt

Line: 1 to 1

META TOPICPARENT	name="PsmSpace"

Machine information

Line: 24 to 24

Open the small breaker
Hold down the middle UPS button

Added:

>
>

For most tasks, simply pushing the red button is sufficient. The UPS will beep continually until the battery is drained, but this is OK.

Procedures

Autohome XYZ - homing the printer before performing any head operation
Loading unloading materials - changing materials canisters
Replacing drive block - replacing the material drive block

Maintenance schedule

Every time		Weekly	Monthly	Monthly/Quarterly			Quarterly

Revision 22006-09-27 - mmt

Line: 1 to 1

META TOPICPARENT	name="PsmSpace"

Added:

>
>

Machine information

Changed:

<
<

Nothing to see here, yet

>
>

Serial number: T0333

Software version: 2.4.0p1

Vantage startup procedure

Hold down top UPS button until beep
Close the small breaker
Close the main breaker
Hit the green flashing button within one minute. If you miss this one minute window, then power-down and start over again.

MACHINE MUST BE ONE AT LEAST FOUR HOURS BEFORE BUILDING PARTS

Vantage shutdown procedure

Hit the red button
Wait for message "It is now safe to turn off the machine."
Wait for fans to completely stop
Open the main breaker
Open the small breaker
Hold down the middle UPS button

Maintenance schedule

Every time		Weekly	Monthly	Monthly/Quarterly			Quarterly
Clean platten	Empty purge bucket	Vacuum build envelope	Inspect O-Ring	Lubricate screws with TriGEL	Lubricate guide rods with Krytox	Inspect tip brush/wipers	Clean vacuum filter	Clean exterior	Clean cone sensor

21 Sept, MMT	21 Sept, MMT	21 Sept, MMT	21 Sept, MMT	25 Sept, MMT		21 Sept, MMT	25 Sept, MMT	21 Sept, MMT	21 Sept, MMT

-- WolfgangHeidrich - 15 Mar 2006

Revision 12006-03-15 - WolfgangHeidrich

Line: 1 to 1

Added:

>
>

META TOPICPARENT	name="PsmSpace"

Nothing to see here, yet

-- WolfgangHeidrich - 15 Mar 2006

VantageCharges.xls: Spreadsheet for computing charges

META FILEATTACHMENT	attr="" comment="Spreadsheet for computing charges" date="1142388250" name="VantageCharges.xls" path="VantageCharges.xls" size="9728" user="heidrich" version="1.1"

View topic | History: r6 < r5 < r4 < r3 | More topic actions...